Hello Guest it is March 28, 2024, 01:52:53 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Nobima

Pages: 1
1
German / Re: hotkey foam cutter
« on: February 04, 2019, 11:28:08 AM »
Ich denke, dass ich nun einigermaßen mit dem Editor umgehen kann. Es erschliesst sich mir nur noch nicht, wie ich den richtigen Eintrag (Terminator) 352 erzeuge, um Deine brain-Datei zu reproduzieren.  Wenn das geschafft ist, müsste es doch möglich sein mit 353 die beiden Achsen X+A in umgekehrter Richtung zu bewegen.

Danke für Deine Geduld !

2
German / Re: hotkey foam cutter
« on: February 03, 2019, 12:02:05 PM »

Hallo,
da habe ich meine Möglichkeiten wohl überschätzt. Dachte, ich könnte nun mit dem Brain-Editor Deine Brain-Datei einfach an das andere Achsenpaar anpassen.
Gibt es für den Brain-Editor eine Anleitung, die mir dies ermöglicht. Meine Google-Suche war nicht so ergiebig.

Vielen Dank !

3
German / Re: hotkey foam cutter
« on: February 03, 2019, 10:01:46 AM »
Super, vielen Dank für die ausführliche Anleitung.
Bei dieser Gelegenheit habe ich gelernt, mit Brains in Mach3 umzugehen. !

4
German / Re: hotkey foam cutter
« on: February 03, 2019, 04:50:11 AM »
Hallo TPS,

Vielen Dank für die Antwort, leider verstehe ich nicht wie ich den "small brain"  verwenden soll, damit der hotkey richtig arbeitet. Ist es ein Makro für den Hotkey?

5
German / hotkey foam cutter
« on: February 02, 2019, 05:23:09 AM »
I want to create hotkeys for my foam cutter to move each pair of axis simuntaneously.

It works, if I set OEM Code 352 on Trigger #1and define a hotkey für OEM Trig #1. The simuntaneously move of the axis starts but do not
stop when the hotkey is released.

Moving each axis with the mouse on a button jog works correctly.

How can I get the right behaviour of the hotkey ?

6
General Mach Discussion / Mach3 foam-cutter hotkey
« on: January 29, 2019, 07:30:40 AM »
Hello,

For my foam-cutter I need in Mach3 hotkeys to move the  X/Z and Y/A axis simultaneously. If I try to set both axis in the System Hotkeys to the same ScanCode only one axis move.
Is there a way to create the required hotkeys, perhaps macros ?

Thanks in advance.
Nobima

7
G-Code, CAD, and CAM discussions / Re: Tangential control
« on: July 02, 2014, 11:54:54 AM »
I am working with RhinoCAM, can you tell me the name of such a post-processor ?

Nobima

8
G-Code, CAD, and CAM discussions / Tangential control
« on: July 02, 2014, 10:45:26 AM »
Hello,

testing a sample on using tangential control with Mach 3, I found that this control works fine with GCode G1 but not with GCode G2/G3. Is a program known that converts GCode G2/G3 to small G1 segments or alternatively a description with the mathematic context to write an own program ?

Thanks, Nobima




Pages: 1