Messages

1

General Mach Discussion / Re: Mach3 and 3D-Printer Problem

« on: December 04, 2013, 04:33:22 PM »

hi rich,
here's a link

http://www.amazon.co.uk/Digital-Dream-DDUM5-Mach3-Controller/dp/B00FWNK8L6


tomorrow I will try your suggestion

but the error does not appear the same and always ...

but the cnc machine suddenly starts from and to the same at the beginning and now and later

2

General Mach Discussion / Mach3 and 3D-Printer Problem

« on: December 04, 2013, 01:37:55 PM »

hello together,

I have a problem with Mach3 and my 3D printer.

As can be seen in the video, if I move an axis-she starts to stutter.

I have the following hardware:

Intel Pentium Dual Cor 1.73 gh
2GB of RAM

To control do I use this Digital Dream CNC map

http://item.taobao.com/item.htm?spm=a1z10.1.w4004-4030726674.4.7tVPXd&id=35269731852

Could it be that my computer is too slow, not after it is used in the calculation

Here's a video on YouTube to view the Z-axis, this error is for all axes once the video is on YouTube, I'll post it here.

http://youtu.be/jip6mRNOYzs


I'm using the latest ddream.dll by Digital Dreams

Thank you for any help