1
General Mach Discussion / Re: Abnormal Condition - Axis are not refered to normal condition
« on: February 03, 2014, 02:49:10 PM »
For those of you still fighting with this, I think I got it figured out today:
Assuming your machine works perfectly well and you still get that annoying Yellow light "Abnormal Condition"
....You need to inform Mach3 what a normal condition is for your setup:
Start-up Mach3 and click [Ref All Home] when all axes have homed to their limit switches, click drop-down menu [Operator] and select [Set Normal Condition]
Mach3 should now accept this state as the "Normal Condition" and you should have a Green light indicating such when the machine has been home referenced.
Worked for me!
Assuming your machine works perfectly well and you still get that annoying Yellow light "Abnormal Condition"
....You need to inform Mach3 what a normal condition is for your setup:
Start-up Mach3 and click [Ref All Home] when all axes have homed to their limit switches, click drop-down menu [Operator] and select [Set Normal Condition]
Mach3 should now accept this state as the "Normal Condition" and you should have a Green light indicating such when the machine has been home referenced.
Worked for me!