Messages

1

LazyTurn / Re: lazyturn fine profile

« on: August 18, 2015, 06:29:41 PM »

Thanks again Russ. 

Radius Mode it is.  Everything is working fine.

2

LazyTurn / Re: lazyturn fine profile

« on: August 15, 2015, 01:26:55 PM »

dia mode vs rad mode.

Figured out my problem with help from Russ, but can't find in the manual how to fix this.  I see how to turn diameter mode on and off but not how to turn it on/off between rough or fine cuts.  When i uncheck diameter mode the program works fine but when in diameter mode the rough cut is correct but the fine cut is still in radius mode. is there a fix for this or do i just need to keep it in radius mode?

Thanks.

3

LazyTurn / Re: lazyturn fine profile

« on: August 15, 2015, 01:08:09 PM »

Thanks Russ, 

4

LazyTurn / Re: lazyturn fine profile

« on: August 15, 2015, 11:40:06 AM »

here is a picture of my file in mach3.  any help would be appreciated

5

LazyTurn / lazyturn fine profile

« on: August 12, 2015, 08:11:20 PM »

Need help.  When i create a rough profile on lazy turn it seems to work perfectly but when i add the fine profile that profile looks correct in lazyturn but the code cuts about twice as deep on the x.