1
General Mach Discussion / Re: Mach 3 through Flashcut Box... A little guidance please....
« on: April 01, 2013, 08:35:48 PM »SOunds like you need a decent CAM to go with it. For plasma I use SheetCam.
You face the same problem in MACH3 with screens you get part or table display.
Just get a larger screen. OR learn to trust your Cam to produce the correct cuts in the correct order. Most times THAT is the operators job setting up the cuts in the correct order(;-).
Just a thought, (;-)TP
Well, tonight I have solved all my issues... well most of them...
I watched a tutorial for SheetCam on YouTube and figured that out, used the post processer to generate G code and then I loaded the G code directly into FlashCut.... BAM... Perfect cutting speed (60 IPM according to the Hyperthem Manual) and I am in business!
Funny how the answer was so simple, I didnt need to upgrade my boxes or programs, I just needed to use what I already had... back to basics.
A big thanks to BR549 for turning the light bulb on for me last night! If your ever up in Michigan the beer is on me!