Messages

1

Share Your GCode / Re: Help with gcode...

« on: March 21, 2013, 10:00:34 PM »

Thank you

2

Share Your GCode / Re: Help with gcode...

« on: March 21, 2013, 08:58:53 PM »

wanna lead me in the right direction ? found this by chance on google....

3

Share Your GCode / Re: Help with gcode...

« on: March 21, 2013, 07:00:32 PM »

didn't work at all every error possible it seems wrong tool wrong code i dont know i can get it to code in inkscape idk

4

Share Your GCode / Re: Help with gcode...

« on: March 21, 2013, 05:24:09 PM »

Example of a first couple of lines look like when i make it from inkscape

%

(Header)

(Generated by gcodetools from Inkscape.)

(Using default header. To add your own header create file "header" in the output dir.)

M3

(Header end.)

G21 (All units in mm)

(Tool diameter should be at least 10.0 mm)

(Depth, as a function of radius w, must be 10)

(Rapid feeds use safe Z=5.0 mm)

(Material surface at Z=0.0 mm)

(Change tool to Default tool)



G00 Z5.000000

G00 X117.431962 Y93.294371



G01 Z-0.203285 F100.0(Penetrate)

G01 X117.388358 Y93.020983 Z0.000000 F400.000000

G01 X117.431962 Y93.294371 Z-0.203285

G01 X117.045628 Y93.881139 Z-0.262438

G01 X116.831478 Y94.819726 Z-0.239296

G01 X116.854930 Y95.344857 Z-0.198572

G01 X117.135262 Y97.272801 Z-0.241864

G01 X117.147990 Y97.321993 Z-0.237490

G01 X117.598445 Y98.724524 Z-0.195552

G01 X117.654042 Y98.918919 Z-0.151553

G01 X118.445224 Y100.337283 Z-0.169192

G01 X118.471076 Y100.383596 Z-0.169785

G01 X119.185183 Y101.601554 Z-0.215420

G01 X119.893532 Y102.822617 Z-0.254536

G01 X120.576397 Y104.126455 Z-0.231733

G01 X120.614497 Y104.205562 Z-0.233116

G01 X121.225226 Y105.613315 Z-0.196342

G01 X121.273740 Y106.331458 Z-0.241018

G01 X121.273740 Y106.331458 Z-0.241018

G01 X121.296910 Y106.908066 Z-0.261168

G01 X121.007012 Y107.280119 Z-0.168995

G01 X120.314946 Y107.060296 Z-0.306888

G01 X119.969619 Y106.553397 Z-0.286540

G01 X119.537255 Y105.802375 Z-0.293963

G01 X118.939819 Y104.771023 Z-0.307340

G01 X118.456570 Y104.206550 Z-0.309880

G01 X117.561982 Y103.813019 Z-0.316710

G01 X117.226476 Y103.910499 Z-0.308638

5

Share Your GCode / Re: Help with gcode...

« on: March 21, 2013, 04:58:33 PM »

Not working i am using a different program to run the tests and the machine probably why it isn't working but when i try to get this switched to gcode through inkscape it keep freezing up because it's got to many things im guessing

Your code when put into the program won't read properly

6

Share Your GCode / Re: Help with gcode...

« on: March 21, 2013, 04:50:09 PM »

Thank you i'll check this out

7

Share Your GCode / Re: Help with gcode...

« on: March 21, 2013, 02:24:07 PM »

NC is and i can convert that

8

Share Your GCode / Re: Help with gcode...

« on: March 21, 2013, 01:55:58 PM »

Here is a larger image

The format needed for the machine program is .ngc

if you need to email it's shtk13@gmail.com

9

Share Your GCode / Re: Help with gcode...

« on: March 21, 2013, 01:46:54 PM »

I'll get a bigger image here but the txt code you sent will work in axis ? doesn't seem to be doing anything

10

Share Your GCode / Re: Help with gcode...

« on: March 21, 2013, 01:16:14 PM »

I'm running this art in inkscape and using that to xfer into .ncg and opening it up on the linus cnc axis program