Messages

1

General Mach Discussion / Step jump problem

« on: March 27, 2013, 04:56:31 AM »

i hope i mean true "step jump"

 my kernel speed 2500hz i want to change lower kernel speed because my machine step jump. My cnc card dealer told me "you need to use lower kernel speed like 1500 hz"  How can i change? Or my problem is for that reason?

sorry my english

thanks

2

General Mach Discussion / Re: g-code cycle not start

« on: November 23, 2012, 12:26:08 PM »

here is my problem i installed demo version but it is same.

http://www.youtube.com/watch?v=cBjqrw4UClM&feature=youtu.be

Here is the test screen

 

This is my xml file. http://ge.tt/1OeaPDS/v/0?c

3

General Mach Discussion / Re: g-code cycle not start

« on: November 22, 2012, 05:07:42 PM »

Me to

baki.

4

General Mach Discussion / Re: g-code cycle not start

« on: November 22, 2012, 04:00:44 PM »

Here is my xml folder.  http://ge.tt/6ZllGAS/v/0?c

 sorry my english i mean if i instal mach3 with paralel port driver mach3 doesn't work....

5

General Mach Discussion / Re: g-code cycle not start

« on: November 22, 2012, 02:02:46 PM »

if i setup paralel port dirver mach is not working. this is my problem.

6

General Mach Discussion / Re: g-code cycle not start

« on: November 22, 2012, 09:39:13 AM »

ok today i found my porblem. i removed mach3 then re-install mach3 and passed driver instal. then reboot my computer and g-code start very well.. Ok so what is my problem? i need to change home board? or change some bios settings? or buy pci paralel port card?

7

General Mach Discussion / g-code cycle not start

« on: November 19, 2012, 10:16:21 AM »

Hi i have tb6560 cnc card from ebay. I installed mach3 program and connect tb6560 setup the pin ect. And I pressed the reset and start cycle button. but g-code not started... then  i changed parallel prot settings on bios. paralell port mode ECP. but does not work i can't find problem....