Messages

1

General Mach Discussion / Re: My Probing don't working

« on: March 21, 2020, 08:50:49 AM »

you have to have 24V power, just as I sent the picture, yours is the same, then checked the diagnostics card in Mach to see if the light comes on when touched ..

2

General Mach Discussion / Re: My Probing don't working

« on: March 21, 2020, 04:10:28 AM »

Hi, I think it will need some power supply, maybe the 24V, you should have it in the board manual ...
Joseph
https://www.buildyourcnc.com/images/RNRInstructionImage22-800.JPG

3

General Mach Discussion / Re: text writev4

« on: October 19, 2017, 11:47:38 AM »

Hi, if you reset the reset button you can not generate a code.
You must enter everything you need then select the font and finally press "Write"
After pressing "return to Mach3", the Gkod will be generated