Messages

1

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: November 22, 2014, 08:28:04 AM »

yes z 0 is bottom of parts, i know its probably the wrong way to do it but 300 name plaques later it seams to work for me lol.

ill try the initial auto zero and see what happens

Cheers sEan

2

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: November 22, 2014, 08:10:55 AM »

just with the fixed plate on the bed of the machine.  I know it is 2.765mm above the bed (z0) so i put that in as a plate thickness.  It works great with simple one touch button for zero just not the auto change.  However it diud work at one point then i messed with the leadscrews to clean and grease them and it doesnt seam to want to work anymore.

Cheers Sean

3

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: November 22, 2014, 07:17:40 AM »

No i didnt run the initial auto zero as i havent got a moveable plate just a fixed one i put in the corner of the machine.  The wierd thing is it was working fine before and then just stopped

Cheers Sean

4

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: November 22, 2014, 06:53:00 AM »

Hi i have a weird problem.  For some reason when the auto tool change activates it does all the steps but is correct.  For instance at the moment it is -1.775 at bed level.  Wherteas if i manually toolchange and press simple zero button it is absolutely spot on. 

Is this somethign you have come across before

Many thanks Sean