Messages

1

Promote and discuss your product / Re: Tiny computer for MACH

« on: June 03, 2012, 10:13:33 PM »

Hi Vince,

we will make special cable connect to that RED connector to as 2nd LPT port.

OK, what does GPIO stand for and what would plug into it for a 2nd parallel port?

Vince

2

Promote and discuss your product / Re: Tiny computer for MACH

« on: June 03, 2012, 08:58:28 PM »

thered connector is  GPIO port can be use as 2nd LPT port (port 378)

What is a GPIO port and a red connector?
Vince

the retail price will be around USD 250.00 and there is 2 LPT come with, one is physical LPT port and 2nd can use GPIO port as red connector.

3

Promote and discuss your product / Re: Tiny computer for MACH

« on: June 03, 2012, 08:57:28 PM »

the CPU is embedded to avoid viberation , there is no chance to replace faster CPU

Is there an option for a faster CPU?  I

Steve

4

Promote and discuss your product / Re: Tiny computer for MACH

« on: May 31, 2012, 02:13:10 AM »

no any O/S pre-install, it is regular PC standard, easy to install Windows or Linux

5

Promote and discuss your product / Re: Tiny computer for MACH

« on: May 29, 2012, 11:15:18 PM »

the retail price will be around USD 250.00 and there is 2 LPT come with, one is physical LPT port and 2nd can use GPIO port as red connector.

6

Third party software and hardware support forums. / Tiny computer for MACH

« on: May 23, 2012, 05:01:56 AM »

The tiny embedded computer (1x  Printer port and GPIO) special for CNC,
support Windows XP and MACH 3
NCBox-189 that comes with 1 GHz CPU, 1GB RAM, CF slot (bootable), 3 x USB, LAN, VGA, PS/2, LPT port and additional GPIO, 5V to 24V
size : 115 x 115 x 35 mm (palm size)

just design to produce, not sure evryone will require ture LPT port and also embedded design. anyinput are welcom







see demo video http://www.youtube.com/watch?v=y62wvJkrIag

just lead to produce, not sure everyone require ture LPT port and also embedded design.
anyinput are welcom thanks
Anthony Lu, Taiwan

7

Promote and discuss your product / Tiny computer for MACH

« on: May 23, 2012, 02:04:58 AM »

The tiny embedded computer (1x  Printer port and GPIO) special for CNC,
support Windows XP and MACH 3
NCBox-189 that comes with 1 GHz CPU, 1GB RAM, CF slot (bootable), 3 x USB, LAN, VGA, PS/2, LPT port and additional GPIO, 5V to 24V
size : 115 x 115 x 35 mm (palm size)







see demo video http://www.youtube.com/watch?v=y62wvJkrIag

thanks
Anthony Lu (Taipei, Taiwan)