Messages

1

G-Code, CAD, and CAM discussions / Re: ART CODE 9991

« on: April 23, 2012, 10:18:59 PM »

I think I found it.
The probe grid size was set to .25 inches in pcb-gcode but the actual grid in the g-code was .007 inches.
The 130,000 plus probing points just got it totally out of whack.
I changed the probe grid setting to 8 inches and now the grid size is .25 inches, and it doesn't crash
I may even try to etch a board tomorrow evening.

Thanks All
Jerry

2

G-Code, CAD, and CAM discussions / ART CODE 9991

« on: April 22, 2012, 09:38:51 PM »

Every time I attempt to load a G-Code file created by pcb-gcode with auto level.
Mach 3 crashes it first shows ART CODE 3336 and then ART CODE 9991.
There is not even the slightest hint as to why it is happening, just poof GONE.
What doesn't Mach3 like that causes this?