Messages

1

PoKeys / Re: Pokeys plugin install on K: ?

« on: April 17, 2012, 03:45:17 PM »

Nothing new on this?

2

PoKeys / Re: Pokeys plugin install on K: ?

« on: April 10, 2012, 04:37:43 PM »

Thanks!

Here are the files!

3

PoKeys / Re: Pokeys plugin install on K: ?

« on: April 10, 2012, 04:12:06 PM »

Thanks for the file, and your all the time fast response!

I have now installed the new pluginfile, enabled the MPG1, and entered zero:s in the ports and pins fields.
I use the DRO101, but i still get no response from the MPG. What am i doing wrong?

4

PoKeys / Re: Pokeys plugin install on K: ?

« on: April 10, 2012, 04:00:03 PM »

What DRO should i choose to set the encoder to MPG1?

5

PoKeys / Re: Pokeys plugin install on K: ?

« on: April 10, 2012, 03:29:32 PM »

If i uncheck the MPG in ports and pins, i can not lit the mpg led on the mpg/jog flyout screen. I get no response att all from my encoder...

6

PoKeys / Re: Pokeys plugin install on K: ?

« on: April 10, 2012, 02:29:12 PM »

Do i need to configure the MPG under ports and pins also? If so, what port number should i use?
I cant get any signal from my rotary encoder in Mach3, i know that it works, because i have tested it in Pokeys utility.

Thanks!

7

PoKeys / Re: Pokeys plugin install on K: ?

« on: April 10, 2012, 12:03:39 PM »

Thanks!
Now the buttons is working!
Now i just have to figure out how to setup the MPG. I have a switch to chose between the axis, but what setting is it for the MPG?

8

PoKeys / Re: Pokeys plugin install on K: ?

« on: April 10, 2012, 08:35:11 AM »

Hood; Now i have tried that, with no luck!

Here is my configurataion XML -file attached.

9

PoKeys / Re: Pokeys plugin install on K: ?

« on: April 10, 2012, 05:39:22 AM »

It is when i configure and send the inputs in Pokeys configuration tool, and then run Mach3 i get that result. I first thought that was the right method...

When i dont use the Pokeys config tool first, i get no response from my pendant.
I will soon attach the file, the machine is att home, and i am at my work....

10

PoKeys / Re: Pokeys plugin install on K: ?

« on: April 10, 2012, 05:13:21 AM »

Yes, i have tried to restart, many times!