Messages

1

SmoothStepper USB / Smoothstepper don`t accept M10P1 / M11P1 commands ?

« on: January 13, 2012, 02:31:58 PM »

Hi,
mach3 don`t accept M10/M11 commands anymore 

Plugin for smoothstepper v17efb should workd but is isn`t .......

WHY ?

Thanks
Dave

2

General Mach Discussion / Re: How to force MACH not accelerate in the middle of engraving ?

« on: January 11, 2012, 02:27:06 PM »

I don`t understand your answer ......

I don`t want a eliminate acceleration ! Just in the middle of laser engraving !

3

General Mach Discussion / How to force MACH not accelerate in the middle of engraving ?

« on: January 11, 2012, 01:49:54 PM »

Hi,

Engraving require constant speed in all lenght of the scanning line except start and stop
Did anybody know how to force mach to not accelerate between engraving line start and stop ?

Dave

4

SmoothStepper USB / Re: Why Smoothstepper made a pause between commands ?

« on: January 11, 2012, 12:36:20 PM »

That`s the problem :    I`m not in exact stop mode ............

5

General Mach Discussion / Why mach make a micropause between commands ?

« on: January 11, 2012, 11:52:29 AM »

Hi,

i got a problem with laser driver by mach....
If i send these :

G1 X0 F10000
G0 X0 Y0.085 Z0

to the mach, it make a little pause between them
How i can fix that problem ?
Is it a some wrong setup or it`s a internal problem

Thanks for help
Dave

6

SmoothStepper USB / Why Smoothstepper made a pause between commands ?

« on: January 11, 2012, 10:20:43 AM »

Hi everybody,

i got a problem with smoothstepper and mach .....

if i send to SS these :

G1 X49.914 F10000
G1 X49.914 Y0.042

He made a pause between them .......

How can i fix it ?
Is it possible ?