Messages

1

General Mach Discussion / Re: USB setting

« on: January 09, 2012, 11:25:50 AM »

HI Dear Hood

Thank you for your reply

Can you please help me to know : how can i create a plug in for usb port?

Thank you

2

General Mach Discussion / USB setting

« on: January 09, 2012, 08:22:05 AM »

Hi to all

Can you please tell me :
for breakout board with usb port, what is the port address in the pin and port setting of Mach3?

Thank you

3

General Mach Discussion / Re: what breakout board?

« on: January 09, 2012, 03:52:44 AM »

Thank you for your reply.


I don't need this breakout board have out put for step motor or servomotor.
I need :
1-  a usb port, not LPT port
2- a board that be able to accept 6 axis Enconders and 6 limit switch with a input for a digital probe.

Can some one help me?


thank you

A C10 on LPT2 would read the encoders. http://www.cnc4pc.com/Store/osc/product_info.php?cPath=33&products_id=45.

The question is the speed at which you need to read the encoders, the available I/Os for other functions, and what other functions your control will need.

You can take take care of the speed consideration by using the Smooth Stepper: http://www.cnc4pc.com/Store/osc/product_info.php?cPath=51&products_id=185.

If you are really short in I/Os, then consider the Ethernet Smooth Stepper with 3  ports: http://www.cnc4pc.com/Store/osc/product_info.php?cPath=51&products_id=366.

If you need a lot of functions, then consider a multifunction breakout board, maybe the C32 or C23 could be good options, or a combination of boards for different ports: http://www.cnc4pc.com/Store/osc/index.php?cPath=33.

Arturo Duncan
http://cnc4pc.com

 

4

General Mach Discussion / what breakout board?

« on: January 08, 2012, 01:37:13 AM »

Hi to all

I need a breakout board that be able to accept 6 axis encoders and 6 limit switch and with a touch probe
Can you please help me to know what breakout beard can do my request?
I don't need this breakout board give me a signal for control a motor.


I am wait for our reply.

Thank you