Hello Guest it is September 22, 2023, 04:57:59 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - jipeess

Pages: 1 2 3 »
Brains Development / Re: help with timer..
« on: December 07, 2016, 04:56:11 PM »
solved it myself!

Brains Development / help with timer..
« on: December 01, 2016, 05:16:11 PM »

is it possible to set set up a brain/timer so that the spindel and cooling starts together but let the cooling stay on for another 30 (or so) secs after the spindel is turned off?
like sort of deactivation delay

i have set up the spindel on output1 and cooling on output2

VB and the development of wizards / Re: imagebox
« on: January 28, 2016, 09:38:55 AM »
thats pretty cool but not what im lookin for,
thats some sort of image trace function (i guess?)

my pic files are photos, not drawings

i need a load file button script that can load a gcode file and at the same time load a linked picture into an image place holder

VB and the development of wizards / imagebox
« on: January 28, 2016, 09:00:11 AM »

is it possible to change picture (custom screen image object) i.e. change file path and update while mach3 is on?

i have a client that wants some sort of imagebox that shows a picture of the part program he load


General Mach Discussion / video window
« on: October 06, 2015, 05:41:04 PM »
hi all

is it possible to link the tiny mouse cursor coords dro in the video window , with user dro´s ?
i.e. make user dro´s showing the cursor position in the video window


General Mach Discussion / Re: help with setting up control buttons
« on: September 25, 2015, 05:02:45 PM »
sort of

its a special designed machine for grinding and honing big copper tubes of various shapes (high voltage breaker parts) prior silver plating, and before that some tape masking must be done,

a tape roll is attached on the machine´s head and the program positions the tape at the startpoint

then the operator has to manually pull out and attatch the tape´s end onto the workpiece and use both hands to press the 2 buttons so that no body parts are within the working zone

while the program winds on the tape, then stops and waits for the operator to cut of the tape, then press the buttons again to repeat the sequence for the next masking position

any ideas?

General Mach Discussion / Re: help with setting up control buttons - CHANGED
« on: September 25, 2015, 03:59:57 PM »
hi again

iwe changed the concept;

is it possible to set up 2 external buttons so that a program starts and keep running as long as both buttons are pressed,

and if any of the buttons are released, the program should go into feed hold mode, then continue when both are pressed again?


General Mach Discussion / Re: help with setting up control buttons
« on: September 23, 2015, 04:41:49 PM »
 :( :( :(
this is a safety issue thing on a special machine im workin with

i told the client it was doable... :-[

is it impossible or just tricky?


General Mach Discussion / help with setting up control buttons
« on: September 23, 2015, 03:40:25 PM »
hi all

im trying to figure out how to write/construct a special jog-macro that involves 2 axis, 2 buttons and some dro's;

when input1 is active, the b axis should move (rotate) at an individual b-axis feedrate and stop on inactive (=button  released)

when input1 AND input2 is active, the z axis should move (together with b) at a individual z-axis feedrate until a pre-set distance is reached and stop even if the buttons are still pressed

if input/button1 is released both axis should stop, if input/button2 is released then z only should stop

is this doable?



General Mach Discussion / Re: M3 and safety stop
« on: August 07, 2015, 05:14:25 PM »
I mean so that the s value dynamicly changes and follows the c value

Pages: 1 2 3 »