1
General Mach Discussion / Re: Scale involuntarily flipping between negative and positive while running.
« on: September 29, 2011, 09:24:58 PM »
G00 G49 G40.1 G17 G80 G50 G90
G20
(MOP NAME: top of wheel)
M6 T1
M03 S15000
G00 Z0.6441
X4.1766 Y-0.3933
G01 Z0.0236 F30
Z0.0000 F50
X-0.3938
X-0.3937 Y-0.3835
X4.1766
Y-0.3736
X-0.3938
//all x, y, and z from this point on with : M5 M9
M30: at the end
3.043.0229 (lockdown), occurs with both my probitix 3 axis sidesteps and my 5 Axis TB6560(only using 3 axis).
G20
(MOP NAME: top of wheel)
M6 T1
M03 S15000
G00 Z0.6441
X4.1766 Y-0.3933
G01 Z0.0236 F30
Z0.0000 F50
X-0.3938
X-0.3937 Y-0.3835
X4.1766
Y-0.3736
X-0.3938
//all x, y, and z from this point on with : M5 M9
M30: at the end
3.043.0229 (lockdown), occurs with both my probitix 3 axis sidesteps and my 5 Axis TB6560(only using 3 axis).