Guest
Show Posts
1
General Mach Discussion / Homing & reference all
« on: May 14, 2011, 04:57:36 PM »
Have a 24 x8 router table. Has limit and home switches on all 3 axis. Every thing works fine and it does route good.
The problem I have is when I first set it up, I do a ref all home and X and Y go to home and back off fine,
but Z goes to home and does not back off. I have set the Off Home to .1"
Z homes at the top, and it does turn on the green lites around the Z zero button. It has worked properly before but has stoped recently.
What am I missing?
The problem I have is when I first set it up, I do a ref all home and X and Y go to home and back off fine,
but Z goes to home and does not back off. I have set the Off Home to .1"
Z homes at the top, and it does turn on the green lites around the Z zero button. It has worked properly before but has stoped recently.
What am I missing?