1
General Mach Discussion / Re: Mach 3 and a Grinder
« on: April 25, 2011, 06:10:28 PM »
It was simpler than that when I got down to doing it.
Like I was saying the diamond we face with is fixed. It is always the same. After we face the wheel we want Z = zero so we can go back to work on the same part we were just grinding. G92Z0 takes care of that. Now we just grind away always knowing what the new diameter of the wheel is.
keith
Like I was saying the diamond we face with is fixed. It is always the same. After we face the wheel we want Z = zero so we can go back to work on the same part we were just grinding. G92Z0 takes care of that. Now we just grind away always knowing what the new diameter of the wheel is.
keith