Hi to all, my name is Gerardo and i just start with this project, reading some post i fix the homing issue, but for some reason on the x axis if i hit Ref Home All with the machine positioned close to the far limit sw it move home sw and it measure +18.5 from a corner to the other corner and the machine is moving really slow, if i execute roadrunner g-code when the machine is moving to a - position when it reach the +0.000 it is over the middle of the table and not close to the far sw like in the beginning, also this movement from a + number “+18.5” to a – number -0.005 is really fast; is faster than the homing speed, do I need set something else, thanks for any help, and sorry if I mistype.
Thanks!@