1
General Mach Discussion / Re: G12 not moving Y axis, sometimes.
« on: October 14, 2014, 04:59:38 PM »
Yes, that fixes it. I checked my configuration and I see that IJ absolute mode is selected in the general configuration screen, so G91.1 obviously overrides that and changes to incremental mode. Also G90.1 executed any time after G91.1 breaks it again, as you might expect. Interesting though that in IJ absolute mode for some Y coordinates and G12 I values, G12 works yet for others it doesn't. The inconsistencies for different Y coordinates, I values, and between G12 and G13 are rather suspicious, particularly since the G-Codes documentation indicates that G90.1 and G91.1 should only affect G02 and G03.