Messages

1

Show"N"Tell ( What you have made with your CNC machine.) / Re: Walnut serving tray with Cypress tree inlay I recently completed

« on: January 01, 2011, 08:49:51 PM »

Oops, wrong tray!  This tray has highly figured Bubinga for the leaves, not Lacewood.  Sorry about that.
Marty Leach

2

Show"N"Tell ( What you have made with your CNC machine.) / Walnut serving tray with Cypress tree inlay I recently completed

« on: January 01, 2011, 08:30:02 PM »

Hi Team
Here is a nice little serving tray I just finished in time for Christmas.  I did the Cypress tree inlay using my Blackfoot 2 X 4 CNC.  I desgned it in Adobe Illustrator the V Carvepro and the Mach2.  The splines you see in the corners are Bubinga sandwiched in Maple.  The tree has a Cocobolo for the trunk and Lacewood for the leaves.  The sides of the tray are angled out 9 degrees just to make it look a little better and to increase the complexity of what should have been a really easy piece of woodworking.....