Messages

1

General Mach Discussion / Xbox 360 controling the probe

« on: January 08, 2015, 02:09:48 PM »

Hello all, just wondering if anybody has any info as to controlling the probe with the xbox 360, im running the big tex blue  probe screen.  tried looking online with no luck. all I can find are comments about creating macro files which I know nothing about

thanks in advance
Manuel

2

General Mach Discussion / xbox 360 and the touch probe

« on: July 24, 2011, 11:32:37 PM »

hello
im running the blue screen for the tuch probe and i recently hooked up the xbox 360. Is there a way to program the the touch probe x, y, & z to the xbox control?

thanks
Manuel

3

General Mach Discussion / Re: xbox 360 controls not working

« on: July 15, 2011, 12:42:25 AM »

forgot to mention, when i plug the 360 into the usb port the green light does turn on in the center of the control

4

General Mach Discussion / xbox 360 controls not working

« on: July 14, 2011, 11:50:47 PM »

hello all
just installed my xobox 360, read most of the posts and got it installed, Its insalled in mach 3 because i can see it in the plug ins, i checked the  green check mark  to activate it. for some reason none of my controls work.  any suggestion

5

General Mach Discussion / Re: Erratic machine behavior

« on: January 31, 2011, 10:04:43 PM »

hood
you the maaann. It worked whatever we did, I found some mechanical errors as well that were causing it to mess up on the z axis,. Who knows what it was and i don't care cuz it works..hhaaaaa
Anyway thanks for the help, greatly appreciated.
When i take my dream bird hunting trip to scotland i'll look you up and buy you a beer

6

General Mach Discussion / Re: Erratic machine behavior

« on: January 31, 2011, 04:45:01 PM »

btw how do you get instant messaging in this forum do. I have to go to my email and see your post there

7

General Mach Discussion / Re: Erratic machine behavior

« on: January 31, 2011, 04:43:43 PM »

25000zh

8

General Mach Discussion / Re: Erratic machine behavior

« on: January 31, 2011, 04:36:28 PM »

hood
eureka moment has been put on hold, on the finish path it started digging down into the stock piece and tapered its way down, when i homed it in its of by about an inch Ill try to slow it down a bit,that last path was at about 50 ft/min
man i dont know whats going on.

9

General Mach Discussion / Re: Erratic machine behavior

« on: January 31, 2011, 03:55:44 PM »

heyy looks like its working, now in English what did i or rather you do to make this happen

10

General Mach Discussion / Re: Erratic machine behavior

« on: January 31, 2011, 03:38:03 PM »

ok
got the motors running in the right direction now with the dir active. let me try it.