Messages

1

Galil / Re: movement is not smooth

« on: December 22, 2013, 08:31:37 PM »

I'm going to try.


Thank you
 udom.

2

Galil / Re: movement is not smooth

« on: December 14, 2013, 10:34:06 AM »

Hi.

Please help me
I am still not resolved


Thank you

udom

3

Galil / Re: movement is not smooth

« on: December 05, 2013, 02:33:02 AM »

image for g code

4

Galil / Re: movement is not smooth

« on: December 05, 2013, 02:20:41 AM »

attach file

5

Galil / movement is not smooth

« on: December 05, 2013, 02:19:56 AM »

I have a problem for galil 21xx + Mach3.
1. Install Mach3 V.3.043.066 on win xp2007.
2.install plugin galil 4.5
This a problem
When I run the G code (attach file) When tool moves along the curve, why machines are so spastic (or movement is not smooth), I suspect that when the run g code first, it will not be a problem. but to run g code for a long time (about 30 minutes) is not smooth moves.
  But the same g code to control fanuc it Ok.

thank you

udom

6

PoKeys / Re: I cannot connec with mach3

« on: October 29, 2013, 05:54:29 AM »

http://youtu.be/33vvMTxUa8U

7

PoKeys / I cannot connec with mach3

« on: October 29, 2013, 05:08:45 AM »

I have a pokey55 usb type but ,I cannot connec with mach3
I use software pokey configuration v3.0.46

thank you
udom

8

Galil / Spindle control

« on: October 26, 2013, 01:21:30 PM »

I want to use "axis w" to control a spindle ".
I can not set plungin and wiring.
I used the inverter "HITACHI" model "WJ200".

thank you

udom

9

Galil / soft limit function

« on: October 26, 2013, 01:01:31 PM »

 >:(Please check this plugin, for me,.
I have the following problem.
When I turn on button "soft limt" and when I press the jog + + ..... motor move FW, same when I press the jog-- .... motor move FW, as well.



Thank you very much

udom.
 

10

Galil / Galil for spindle

« on: October 21, 2013, 10:48:14 AM »

how to use galil for drive inverter spindle from mach3

thank you

udom  wansao