Messages

1

General Mach Discussion / Re: Mach3 PWM spindle works on Diagnostics, not on ProgramRun

« on: February 25, 2021, 03:50:17 PM »

Thanks Peter, updating the macros fixed it.
I thought setting up the spindle output pins would update the macro - guess not.
Next step is spindle feedback and axis calibration 

Good to hear.
Cheers,

Peter

2

General Mach Discussion / Re: Mach3 PWM spindle works on Diagnostics, not on ProgramRun

« on: February 22, 2021, 06:49:24 PM »

Also check that the pin being used for the PWM output is not also assigned to another function.

3

General Mach Discussion / Re: Mach3 PWM spindle works on Diagnostics, not on ProgramRun

« on: February 22, 2021, 06:47:20 PM »

Hi
If the spindle works by toggling the Spindle button on the Mach3 screen, but not when you type M3 in the MDI window, have a look at what is in the M3 macro located in the macro directory for the profile you are using.
Cheers
Peter

4

General Mach Discussion / Re: License question

« on: February 02, 2021, 06:53:31 PM »

Hi,
Yes, you can install Mach3 and Mach4 on the same machine.
Note that you will need a licence for Mach3 and a separate licence for Mach4.
Cheers,

Peter

5

General Mach Discussion / Re: Mach3 with CNC Step Zero-3

« on: May 05, 2020, 06:37:45 PM »

Hi,
You may have a catch-22 situation going on.
1. The controller is asserting the Estop as there is no charge pump signal
2. Mach3 is turning off the charge pump as it sees the Estop signal from the controller.

If you go into the Mach3 Config-> General tab, there is a checkbox called "chargepump on in Estop". Make sure that is ticked, as see if that solves your problem.

Cheers,

Peter

6

General Mach Discussion / Re: re- hall of shame

« on: December 20, 2019, 09:29:27 PM »

Or a verified reseller like me😀
https://www.homanndesigns.com/index.php?main_page=product_info&cPath=7&products_id=8

Cheers
Peter

7

General Mach Discussion / Re: Mach 3 lost spindle control ??

« on: October 21, 2019, 12:32:08 AM »

Hi,
Which Digispeed board are you using? Also do it’s Leds indicate is is doing what it’s supposed to do?

Cheers

Peter

8

General Mach Discussion / Re: How to stop servo spindle gracefully on Estop or stop button?

« on: October 10, 2019, 12:29:11 AM »

I wouldn’t think there is a setting. If you push the EStop Mach3 tries to stop everything as quick as it can.
After all, it’s an Emergency Stop.

Cheers
Peter

9

Finished Plugins for Download / Re: Mach Mad Diagnostics Plugin

« on: August 26, 2019, 07:01:32 PM »

Hi
Although not in the USA you can purchase it here.
https://www.homanndesigns.com/index.php?main_page=product_info&cPath=7&products_id=62

Cheers

Peter.

10

General Mach Discussion / Re: Mach3 and latest ESS Driver - threading now works!

« on: August 09, 2019, 12:07:27 AM »

Hi Roger
That all makes sense.  Presumably I can use the prescaler value to reduce the ppr for the 2000ppr encoder.

Peter