Hello Guest it is December 15, 2019, 06:21:30 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - obal

Pages: 1 2 »
1
Show"N"Tell ( Your Machines) / Re: The Laser Project.
« on: April 10, 2012, 03:47:30 PM »
Hallo Tweakie. Please paste postprocesor for DOT-G  Laser.dgp.    Thank you.

Those of you that have been following this (never ending) thread will know that between Andrea in Italy and myself in the UK we have spent quite a lot of time putting the Mach Impact / Laser engraving plugin through it’s paces. Although there are still some improvements that could be made to the plugin and it still has a lot of mileage left in it, the legacy issue of it’s requirement for a parallel port are starting to show and it is perhaps time to start looking at alternatives.

In the Eastern European countries, for many years, it has been common practice for black marble monuments and remembrance plaques to display an engraved ‘photographic style’ of image and this has inevitably prompted the development of CNC software to complete the task. One such software is “DotG” a Hungarian program which has just had an English translation version released. It is completely ‘free of charge’ and can be downloaded from here http://dotg.weebly.com/download.html

DotG works in an entirely different way to the Mach plugin insofar as it creates GCode from a pre-processed 1 Bit image and although I haven’t quite got my postprocessor completely sorted everything looks extremely promising so far.
It is early days yet but I will keep you posted of my experience with this software as I learn more.

This example image of Audry Hepburn with the glamour of the 1950/1960’s was laser cut into some scrap MDF whilst I was testing various settings and it would, I think, look quite stunning cut into some mirror tile (project awaiting).

Tweakie.

Those of you that have been following this (never ending) thread will know that between Andrea in Italy and myself in the UK we have spent quite a lot of time putting the Mach Impact / Laser engraving plugin through it’s paces. Although there are still some improvements that could be made to the plugin and it still has a lot of mileage left in it, the legacy issue of it’s requirement for a parallel port are starting to show and it is perhaps time to start looking at alternatives.

In the Eastern European countries, for many years, it has been common practice for black marble monuments and remembrance plaques to display an engraved ‘photographic style’ of image and this has inevitably prompted the development of CNC software to complete the task. One such software is “DotG” a Hungarian program which has just had an English translation version released. It is completely ‘free of charge’ and can be downloaded from here http://dotg.weebly.com/download.html

DotG works in an entirely different way to the Mach plugin insofar as it creates GCode from a pre-processed 1 Bit image and although I haven’t quite got my postprocessor completely sorted everything looks extremely promising so far.
It is early days yet but I will keep you posted of my experience with this software as I learn more.

This example image of Audry Hepburn with the glamour of the 1950/1960’s was laser cut into some scrap MDF whilst I was testing various settings and it would, I think, look quite stunning cut into some mirror tile (project awaiting).

Tweakie.


2
Mach SDK plugin questions and answers. / Re: Impact engraving plugin
« on: August 18, 2011, 04:58:30 PM »
Machine magnet engraving .
http://www.youtube.com/watch?v=ylsMUTGTx1Q

3
Show"N"Tell ( Your Machines) / Re: The Laser Project.
« on: August 18, 2011, 04:33:57 PM »
hallo.
Look video working machine magnet.

http://www.youtube.com/watch?v=ylsMUTGTx1Q

4
Mach SDK plugin questions and answers. / Re: Impact engraving plugin
« on: April 11, 2011, 05:23:10 PM »
You have function Aspect Ratio ?

obal,
I have the same version! Thanks anyway

5
Mach SDK plugin questions and answers. / Re: Impact engraving plugin
« on: April 11, 2011, 01:52:08 PM »
Hallo ntlaser .
You have got old version firmware laser engraving.
See pictures .

Hello.I am posting the photos of the double image.With some other test I did ,I notice that the images come closer if i reduce the speed.I really dont know what to do!!

6
Mach SDK plugin questions and answers. / Re: Impact engraving plugin
« on: April 02, 2011, 01:38:36 AM »
Yes ! Wery good Job. My machine not activate 1/2 pulse = work OK.  Super.

  :) 
Everything works.
It should not be activated 1 / 2 Pusl.
Now I can buy the license ....
I hope it can also be used for others ..
Thank you all.

7
Mach SDK plugin questions and answers. / Re: Impact engraving plugin
« on: April 01, 2011, 09:01:56 AM »
Hi
You have old model plugin
Its my plugin OK.   http://www.machsupport.com/forum/index.php/topic,16446.40.html

Hi, I tried, but the problem is the same.

8
Mach SDK plugin questions and answers. / Re: Impact engraving plugin
« on: December 02, 2010, 06:01:04 AM »
Version is more.This me meets.
link: http://www.machsupport.com/forum/index.php/topic,11996.0.html             file     zlib.zip

9
Mach SDK plugin questions and answers. / Re: Impact engraving plugin
« on: December 01, 2010, 03:53:40 AM »
Hallo Dan.
In pin 8 is impulse short for laser. ( 40 micro sec.)
For electromagnet you have to impulse pull min. on 10 milli sec. Here's problem.
Your system is OK.   Impulses you pin 8 certainly runs.

10
Mach SDK plugin questions and answers. / Re: Impact engraving plugin
« on: November 29, 2010, 07:16:49 AM »
Hallo Dan.
you have to activate :

Pages: 1 2 »