Messages

1

General Mach Discussion / Re: Stepper running rough with Mach3 at low speed

« on: October 26, 2013, 08:13:02 AM »

Try to set "Driving Current" lower in your stepper drivers. I think is not a computer problem.
Steps too "Hard" for soft moving mechanics.

2

General Mach Discussion / Re: Mach3 Turn CSS workaround with plugin!

« on: October 26, 2013, 08:05:16 AM »

I make the first version for testing, please leave a comment if you tested.

Installation instructions in "read.me.txt", please make a backup from your configuration before install.

limitations:
Do not use more than 0.20mm/rev feed.
Only work in Metric mode, with this version if you use Inch mode you get bad results.
Not perfect in arc moves. (need more programming)

3

General Mach Discussion / Re: Mach3 Turn CSS workaround with plugin!

« on: October 14, 2013, 04:07:45 AM »

Not only work with PP, but not working with external pendants have feed override, plugin calculate the requested feed in mm/min and continuously change the feed override to follow the spindle speed.
Plugin hide the original feed overide but you can change the override with another user dro, not yet finished to public use.

4

General Mach Discussion / Re: Mach3 Turn CSS workaround with plugin!

« on: October 13, 2013, 11:03:45 AM »

https://www.youtube.com/watch?v=nGHxKQHc1HA

5

General Mach Discussion / Mach3 Turn CSS workaround with plugin!

« on: October 13, 2013, 10:35:15 AM »

I try to find workaround to fix Turn mode G96+G95 issue, and now i have the solution, but not compatible with external feed overrides, only if you can modify to control an OemDro, littlebit later im upload video from work.

6

General Mach Discussion / Modio question.

« on: June 23, 2010, 01:49:28 PM »

Hello.

I make a retrofit for a turretpunch machine with mach3 and modio with my I/O card, everithing is working fine but only one question remains, how to readback modbus outputs state, i found commands for Inputs (GetInput, GetInBit) but i want to readback output from different scripts, please help me, How to readback modio outputs.