Hello Guest it is March 28, 2024, 06:33:39 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Phatjap

Pages: 1 2 »
1
General Mach Discussion / Re: Cutting in the wrong place
« on: January 13, 2011, 10:14:03 AM »
Hi there

I'm not at home right now but I know from memory when create the drawing with cut 2d, I use the align centrally button and it is deffinately depicted directly centre of the work piece. When I get home I shall have another look though.

Regards,

Neil.

2
General Mach Discussion / Re: Cutting in the wrong place
« on: January 13, 2011, 06:57:01 AM »
Hello Rich,

I appreciate your responses, you guys really are great.

I'm not entirely sure of what to do but I will go and have a good tinker with the Cut2d (which is from Vcarve, by the way) and see what I come up with!

Many thanks.

Neil.

3
General Mach Discussion / Re: Cutting in the wrong place
« on: January 13, 2011, 02:02:06 AM »
Hi there,

You are very patient people, thank you!!

I have attached the XML and G-code files.

Kind regards,

Neil.


4
General Mach Discussion / Re: Cutting in the wrong place
« on: January 12, 2011, 04:41:19 PM »
Hi

Which XML file to do I use? Sorry, bit useless, theres loads!

5
General Mach Discussion / Re: Cutting in the wrong place
« on: January 12, 2011, 04:20:21 AM »
Hello

Thankyou for you reply. Typically I jog to the edge of the work piece and zero x and y - but it starts moves up and right, as depicted in Mach 3 path screen. It seems to be placing the work in the top right corner of the workpiece instead of central, as set in Cut2d.

Many thanks,

Neil

6
General Mach Discussion / Cutting in the wrong place
« on: January 11, 2011, 03:54:17 PM »
Hello,

Please forgive my daft questions.

My machine seems to be running well after much tweaking, however, I'm having a problem with the cut starting in the wrong place . I'm using Vetric Cut2d for engraving and Mach3 seems to be placing the lettering top and right of the material, and proceeds to cut in that position although I have ensured that it is central in Cut2d.

Can anyone suggest what might be happening?

Many thanks....

Neil.

7
Hi Klaus,

Thank you for your help.

Rgds,

Neil.

8
OK, how do I find version 2.01?!!  :-\

Merci.

9
Great news, thanks Klaus.

Regards,

Neil.

10
OK great news, thanks for the replies - if I update to version 2.01, will it keep the settings already there and just 'update' ?

Many thanks.

Pages: 1 2 »