1
General Mach Discussion / Re: Need help with Bridgeport Series One CNC Retro Fit
« on: November 08, 2010, 11:35:50 PM »
BR549,
I don't know what happend to the rest of my last post but here is is again. Steppers are wired parallel the voltage reads 58.6 VDC at idle and around 58.3 or so at 70 IPM. Just for thought, Bridgeport set the steppers on BOSS 5 at 1/2 step pulse which ment that each pulse was .0005 of movement. This may be part of the reason that big NEMA 42 don't like micro steeping. (10000 pulse per inch is a lot of pulses) I have emailed GECKO for some ansers.
Thanks
Coke
I don't know what happend to the rest of my last post but here is is again. Steppers are wired parallel the voltage reads 58.6 VDC at idle and around 58.3 or so at 70 IPM. Just for thought, Bridgeport set the steppers on BOSS 5 at 1/2 step pulse which ment that each pulse was .0005 of movement. This may be part of the reason that big NEMA 42 don't like micro steeping. (10000 pulse per inch is a lot of pulses) I have emailed GECKO for some ansers.
Thanks
Coke