Hello Guest it is November 27, 2020, 11:58:52 PM

### Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

### Messages - Atlas56

Pages: 1 2 3 4 »
1
##### Video P*r*o*b*i*n*g / Re: Mouse freezing on windows XP
« on: February 02, 2015, 09:02:14 PM »
Your CNC table is emitting EMI and the wireless mouse receiver is receiving the EMI noise signal with the mouse signals and getting confused, the mouse driver(s) are locking up.

2
##### General Mach Discussion / Re: Creating wizards
« on: November 23, 2014, 10:08:44 PM »
I'm glad to see you're starting out with an easy programming project. You have it figured out “enter diameter, shaft size, etc” as variables in stead of fixed value. Just  create the equations and functions with fixed values to  generate the code and then replace the fixed values in equations and functions with variables. The difficulty of a program can be calculated using the number of variables.
Difficulty = Number of Variables2
4 = 22
400=202

Good luck.

3
##### General Mach Discussion / Re: DRO Script help.
« on: November 11, 2014, 07:12:31 PM »
Try this.

SetUserDRO(1008, 1.234) 'UserDRO(1008) = 1.234

Distance = GetUserDRO(1008)

Code "g90 G0 X" & distance & "A" & distance

'X and A move to 1.234

4
##### Show"N"Tell ( What you have made with your CNC machine.) / Re: Small project not going well
« on: April 25, 2014, 10:57:23 PM »
Are you making all the cuts accross the grain first and then with the grain too minimize chipping. The other thing to try is doing all the cutting in the wood end gain. Good luck.

5
##### VB and the development of wizards / Re: Threading wizard doesn't work?!
« on: May 31, 2013, 09:19:02 PM »
All you need to do is add G94 in your first line of code for example "G18 G40 G49 G90 G94 G50 G80".
and G93 at the end before M30 line.

6
##### G-Code, CAD, and CAM discussions / Re: G18 and G02 G03 problem
« on: April 02, 2013, 10:00:36 PM »
Delete the problem line below and you will find you still have  a problem in the remaining code.
(************** the following line always goes the wrong way whether I use G02 or G03)
G03 X 0.592 Z-0.129 I -0.041      (90 degree arc)

Did you write this code by hand?

7
##### G-Code, CAD, and CAM discussions / Re: G-Code issue - different part than the design?
« on: April 02, 2013, 09:12:58 PM »
I did not see any thing wrong with the code. If your using stepping motors can they support an F50 feed rate? The codes cutting arcs with F50 and G1 with F10, looks a little odd. Try F5 for the F10 & F50 and see if it works better.

8
##### FAQs / Re: edit gcode... where does the file go?
« on: March 22, 2013, 09:06:28 PM »
its in the cloud.

9
##### Feature Requests / Re: Feed override for all axis motion commands
« on: March 14, 2013, 09:50:48 PM »
You can do what I think you’re talking about by pressing the Escape key while a G31 X4 F12 command is being executed. It also works in a probe macro with a G31. The axis move slows down and stops, like you pressed the “Feed Hold” in a G1 command move.

10
##### VB and the development of wizards / Re: XML file reader
« on: January 27, 2013, 03:19:17 PM »

It is easy. in the xlm file do a search for the variable name between < and >
then look for the same variable name between </ and >
the value is between the first and second finds.
For example OEMDRO131 = 4200 in string below.
.....OEMLED130><OEMDRO131>4200.</OEMDRO131><OEMLED13.......

Pages: 1 2 3 4 »