Messages

1

General Mach Discussion / Re: CAN SOMEBODY HELP ME ?

« on: January 17, 2009, 02:51:31 PM »

Hood , i thincks i tried everything .

i'm going to return the item to the suppliar.

I  see that you are  professional , can you tell me where to buy 4 axis nema 23 kit that work  perfect with mach3 ?

Anyway Thanks for all advices !

Sh.y

2

General Mach Discussion / Re: CAN SOMEBODY HELP ME ?

« on: January 16, 2009, 06:28:58 AM »

Thanks for everybody it's wonderful we can help each other around the world !

Chip, i tried to  select the Sherline 1/2  Pulse Mode - not help , i tried setting the LowActives "Step & Dir." States to "Checked"- not help and i see the Pulse Frequency & Time in Int. values on the Diagnostic Screen.
i attached the files help i got from the supplier (thanks for the photos you send , you know one photo alike 1000 words )

Hood,  you said to run the driver test, i run it before and everything was like the video toturial (32-36 Time between pulses Us), but now i checked  it when the Mach3 was opened  and he gave me 18-64 pulses sometimes .  second when the test  opened and "system test in 3..2..1.."
i got a message in the target windows "pulssing too fast"  .

mabye this is the problem !   what are you advice me to do ? 

Sh.y

3

General Mach Discussion / Re: CAN SOMEBODY HELP ME ?

« on: January 15, 2009, 06:21:34 PM »

here is the link :

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160309839747&ssPageName=MERC_VIC_RCRX_Pr3_PcY_BIN_IT&refitem=160307400325&itemcount=3&refwidgetloc=closed_view_item&usedrule1=CrossSell_LogicX&refwidgettype=cross_promot_widget&_trksid=p284.m183&_trkparms=algo%3DCRX%26its%3DS%252BI%26itu%3DUCI%252BSI%26otn%3D3

Hood  i'm very appreciate your help .

Sh.y

4

General Mach Discussion / Re: CAN SOMEBODY HELP ME ?

« on: January 15, 2009, 05:35:38 PM »

Hood i also tried to change the pulse and nothing going on .
yesterday  i tried to use kcam4 controller and the motors  moved (not so smoothly but moved)
but i want Mach3 to be my controller !

5

General Mach Discussion / Re: CAN SOMEBODY HELP ME ?

« on: January 15, 2009, 05:22:18 PM »

Hi Hood
I check my port address and it's fine and i used the onboard port .


Sh.y

6

General Mach Discussion / Re: CAN SOMEBODY HELP ME ?

« on: January 15, 2009, 05:10:10 PM »

oh!  Hood thaks for your attention .

7

General Mach Discussion / Re: CAN SOMEBODY HELP ME ?

« on: January 15, 2009, 05:06:47 PM »

sorry Chip
i hopes that i attach now the right file .
Thanks

8

General Mach Discussion / Re: CAN SOMEBODY HELP ME ?

« on: January 15, 2009, 04:49:13 PM »

Thanks Chip for your help i'm appreciate !
i attach the file .

9

General Mach Discussion / Re: CAN SOMEBODY HELP ME ?

« on: January 14, 2009, 06:00:38 PM »

you  are right Chip ! but i have another problem :

 WHEN THE "RESET" FLASHING THE MESSAGE "ESTOP BUTTON PRESS"
APPEAR AND I HEAR THE MOTORS (TURN ON) AND WHEN I HIT "RESET" EVRYTHING
IS OK.(NO ERROR ) BUT I DON'T HEAR THE MOTORS (TURN OFF) AND THE
MOTORS NOT MOVE AT ALL (THE NUMBER ON THE SCREEN MOVE WHEN I PLAY WITH
THE ARROWS)
where i wrong ?

10

General Mach Discussion / Re: CAN SOMEBODY HELP ME ?

« on: January 14, 2009, 11:55:26 AM »

Thanks  Chip but
the pin # is 0 and the result is the same -    the sistem automatically
 change it the ENABLE ESTOP to green.