6

« **on:** May 25, 2008, 01:27:56 PM »
Hello I would like someone to check this out for me if you don't mind?

Running Mach(tried lockdown and newest), Using Newfangled (tried lockdown and newest) cut circle groove.

After entering parameters I select preview and all looks ok.

Select Post Code then verify tool path and the tool path changes?

Here's the code produced and I noted corrections to make it work with out lead-ins.

it seems like it sets up for the cut then does a tool comp for inner cut half way around then goes back to outer cut?

Have a look and let me know what you see.

Thanks,

Robert

(Code by Newfangled Wizard, 5/25/2008)

(Program Posted for Aluminum )

G0 G49 G40.1 G17

G80 G50 G90 G98

G20 (Inch)

(***** Circular Groove/Cutout *****)

M6 T2

M03 S3500

M8 (Flood On)

G00G43 H2 Z0.1

G00 X3.9799 Y-0.1437

G42 P0.125

G01 X3.8362 F17.5

G02 X3.6925 Y0 R0.1437 (change to G01 and remove R0.1473 )

G01 Z-0.03 F8.75

G03 X-3.6925 Y0 R3.6925

X3.6925 Y0 R3.6925

G00 Z0.1

G02 X3.8362 Y0.1437 R0.1437

G40

G00 X3.9799 Y-0.1437

G42 P0.125

G01 X3.8362 F17.5

G02 X3.6925 Y0 R0.1437 (change to G01 and remove R0.1473 )

G01 Z-0.06 F8.75

G03 X-3.6925 Y0 R3.6925

X3.6925 Y0 R3.6925

G00 Z0.1

G02 X3.8362 Y0.1437 R0.1437

G40

G00 X3.9799 Y-0.1437

G42 P0.125

G01 X3.8362 F17.5

G02 X3.6925 Y0 R0.1437 (change to G01 and remove R0.1473 )

G01 Z-0.09 F8.75

G03 X-3.6925 Y0 R3.6925

X3.6925 Y0 R3.6925

G00 Z0.1

G02 X3.8362 Y0.1437 R0.1437

G40

M5 M9

M30