Hello Guest it is March 28, 2024, 06:00:37 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Guergo

Pages: 1
1
General Mach Discussion / Re: Some problems with Mach 3
« on: March 07, 2007, 06:50:50 AM »
 Mr. Barker,

You have found our problem. Thank you for your support.
Sorry if we have disturbed you.
Thank you very much and I wish you luck.
--
Best Regards:
eng.Georgy Simeonov
Manager
Maximum Engineering LTd.
http://WWW.MAX-ENG.COM

2
Hi
My name is Georgy Simeonov and I am mechanicle engineer - designer. I am also the manager of little firm in Sofia, Bulgaria - Maximum Engineering Ltd. My webpage is www.max-eng.com
I use Mach 3 for Plasma Cutting mashine.
I wish you luck. ;)

3
General Mach Discussion / Some problems with Mach 3
« on: March 05, 2007, 05:20:05 PM »
Hi,
I downloaded from the site MACH 3 CNC CONTROLLER  Version R 2.0.053, which I am using with plasma cutting system. A problem appeared with the version with plasma screen. If I move the machine by X axis, to one or another direction, axis Z moves actually, to one or another direction. If I move the machine by Y axis, X and Y are moving together in the same time, to one direction, even if I change the direction by the keyboard. Adding the license file, doesn’t solve the problem. The coordinates on the screen are correct, but the machine is not in a condition to make something correctly.
When I turn the milling screen on, the problem mentioned above doesn’t exist anymore and the machine turns correctly to all the axes. The machine is made for plasma cutting, so I would like to use the plasma screen, which is out of use really. I am forced to use the milling screen.
In the system for plasma cutting I use plasma installations delivered by HYPERTHERM -  POWER MAX 1650, which can signalize the CNC controller when the toggle torch has drilled the sheet iron, so the movement to the contour to begin. If I can use such possibility of the CNC controller, the process of plasma cutting will be absolutely automatic. My question is if I have such opportunity.

Pages: 1