Hello Guest it is October 27, 2021, 09:44:55 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - cab.guy

Pages: 1
1
General Mach Discussion / Re: y-axis homing problem
« on: December 18, 2009, 01:01:21 PM »
Hood,I owe you,I spent 4 days loading and reloading to no avail. Check this out ,the problem occurred when I changed from a 10 foot printer cable to a 25 footer,the machine immediately  acted up.The auto zero default in the homing and limits changed by electrical interference ,yes it can happen.Thanks so much,Ron.

2
General Mach Discussion / y-axis homing problem
« on: December 18, 2009, 11:47:48 AM »
After 6 months of normal use,when I hit ref all home btn.  z hits the prox , dro goes to zero,green light ,all is good. when y goes to prox ,dro will indicate a value of several inches,yet I still get a green light as an acknoleagement that yes I am at home.By the way if I then hit machine coordinates it indicates that very same inch value. If I attemp to zero out that same inch value,Itputs it into G-54 offsets.I cant get rid of it. Z,X,A axis are normal.That same inch value also changes upon each start up.Also that same inch value will show up when all ref bnt. is pushed and Y axis g-54 offsets are shown to be zeroed out.Mach3

3
General Mach Discussion / Re: Reinstalling mach3
« on: December 13, 2009, 01:44:28 PM »
Thanks hood for getting back so soon,Im making progress but Im unable to locate files for custom screen btns.,edit script for auto z,were they suppose to be with mach3mill.xml ?
Also I noticed Im missing tool offset coordinates. Thanks Ron.

4
General Mach Discussion / Reinstalling mach3
« on: December 13, 2009, 10:45:15 AM »
I have installed the new driver,upgraded the license.Now i need to move xmls,macros,brains,screen4 ect. I am unable to reinstall these files/folders.Do I delete the  ie download folder xmlbackups and replace with old xmlbackup folder? When I saved mach3 its in its complete form. Im trying to get just the default settings back. Could someone please explain step by step what I am missing?

Pages: 1