Messages

1

PoKeys / Re: Pokeys mach3 buffer ahead time setting?

« on: September 15, 2023, 01:53:34 AM »

HI,
motion buffer in PoKeys is static. What is the reason you want to increase it?

2

PoKeys / Re: PoILWriteMemory

« on: September 15, 2023, 01:52:30 AM »

Please open a ticket on: support.poscope.com

3

PoKeys / Re: POKEYS 57 FROM CNC4PC

« on: September 15, 2023, 01:50:41 AM »

Hi,
pins are described in the user manual. You can download it from here: https://www.poscope.com/product/pokeys57e/

4

PoKeys / Re: Firmware problems 57E

« on: October 31, 2014, 10:02:24 PM »

Hi,  Markus

Do the axes stop running if you release emergency stop switch (is switch polarity correctly configured?)? Did you have any application running when you started pokeys setup with the new version? It might have happened that communication library was not installed correctly and mach3 plugin is still using the old one. Please restart your computer and install PoKeys setup without any application running.

5

PoKeys / Re: Odd Z Home Invert Direction settings behavior.

« on: January 28, 2013, 01:25:03 AM »

We will check these and try to recreate problem.
Can you please send Mach and PoKeys configuration file to: support@poscope.com

6

PoKeys / Re: NEW: 'Official' PoKeys Mach3 Plugin - 'beta' version v0.01

« on: June 02, 2012, 05:17:01 PM »

Please contact: support@poscope.com

7

PoKeys / Re: Interference

« on: June 01, 2012, 04:43:22 PM »

Hi!

Please first check with pull up and cap. Maybe adding shielding cables could add aditional protection, but my opinion is that cap and pull up should be enough.
Aditional shilding may help if upper measure will not bring satisfactory results.

8

PoKeys / Re: external buttons and relay board

« on: May 31, 2012, 07:24:35 PM »

New plugin was released.

9

PoKeys / Re: Interference

« on: May 31, 2012, 07:23:34 PM »

Also pull up about 1k and 100n cap paralel to switch may help you.

10

PoKeys / Re: NEW: 'Official' PoKeys Mach3 Plugin - 'beta' version v0.01

« on: May 31, 2012, 07:22:14 PM »

May 31, 2012
PoKeys 3.0.30 update available

We are releasing this update together with the new version of PoKeys Mach3 plugin.

SW+FW: http://www.poscope.com/productattachments/index/download?id=29
Mach3 plugin 'beta': http://www.poscope.com/productattachments/index/download?id=75
Mach3 plugin manual: http://www.poscope.com/productattachments/index/download?id=77

Changes:
  3.0.30 (30.5.2012)
  - AuxilaryBusSetDataBytes function - no arrays or pointers for better VBScript compatibility
  - Fast Encoder index reset bug fixed
  - Mach3 configuration delete option added
  - Mach3 plugin pulse engine settings bug fixed
  - NEW: Mach3 plugin: PWM support
  - NEW: Mach3 plugin: LCD support
  - NEW: Mach3 plugin: analog support (analog joystick, analog to DRO mapping, offsets and gains adjustment, automatic calibration)
  - NEW: Mach3 plugin: IO mapping (Mach3 native input-output pins, additional 100 Mach3 IO device pins - device name PoKeys_{serial number})
  - NEW: Mach3 plugin: dedicated menu for each device
  - NEW: Mach3 plugin: homing support
  - NEW: Mache plugin: support for pendant with the activation switch
  - NEW: Safety charge pump on pin 53
  - NEW: Fail-safe based on connection timeout
  - NEW: Joystick HAT switch support added
  - Mach3 plugin Export configuration saving bug
  - Homing direction change saving fixed
  - Pulse engine bugs fixed (changing modes)
  - PoI2C module improved