Messages

1

Brains Development / Mach3 Determining the velocity of an axis near real-time

« on: October 20, 2019, 06:27:09 AM »

Hi,
This is Nuri from MakerStorage LLC.
I need your help on Determining the velocity of an axis near real-time with brains (or maybe with vb script) with Mach3
I want to send this information via Modbus. I know the Modbus part but need help on getting the current velocity of one axis.
Thanks for your help

Regards,
Nuri
www.makerstorage.com

2

Show"N"Tell ( Your Machines) / Re: Mach3 3D Printer

« on: May 26, 2016, 09:52:40 AM »

Can you please tell us more about the electronics you use for the extruder temperature control. Did you use something like this one?

3

Promote and discuss your product / Re: Mach3 as 3d printer software

« on: August 28, 2013, 02:33:51 PM »

here are the information and connection diagrams

http://cnc2printer3d.wordpress.com/

4

Promote and discuss your product / Re: Mach3 as 3d printer software

« on: January 11, 2012, 03:32:08 PM »

This is the link you can download the modified replicatorG to use with mach3.

https://github.com/downloads/cnc2printer3D/cnc2printer3D/GENEXLAB_REPG_V1.zip

5

Promote and discuss your product / Re: Mach3 as 3d printer software

« on: January 08, 2012, 02:45:14 PM »

Hi,
I have modified both the replicatorG software (http://replicat.org/) as well as the skeinforge software to get it to output G-Code for mach3.
the generated G-code can be used directly with mach3. I want you to test my modified replicatorg and print some stuff. Please help me to be sure about this software is working well.
After then I will publish it in my web site : http://cnc2printer3d.wordpress.com/
Please send me your email address if you want to get it and try.

Regards,
Nuri Erginer
3dprint@gnexlab.com

6

Promote and discuss your product / Re: Mach3 as 3d printer software

« on: November 30, 2011, 02:56:10 AM »

I am very happy to announce that the new board and a new web page has been released. http://cnc2printer3d.wordpress.com/
This page is full of information to help people who have their own desktop CNC machine and wish to use it as a 3D printer.
An other new development is a mach3 add-on which will allow you to run Skeinforge (the modified one) inside mach3. You will use mach3 software both for slicing the STL file and printing directly.
The controller board will isolate the temperature controlling functions from motor control functions. This will help us to setup a 3d printer in a modular and easy way. I hope you will enjoy the idea. Please post your photos and videos about your setup.

Regards,
Nuri Erginer
store.gnexlab.com

7

Promote and discuss your product / Re: Mach3 as 3d printer software

« on: July 11, 2011, 04:36:26 PM »

I want to happily announce that I am working on the second version of the controller board.

I got lots of great feedback from the people. It is a very easy way to have a 3d printer. This board is dealing with all the complex issues. And separate the temperature controlling stuff from the CNC tasks. It is very easy to use because it is stand alone and plug and play. Just connect the sensors and the relays set the temperatures and go.

The new board will have some nice features. I will also try to set up a video while printing. I want to thank all of you because of your supports.

Regards,

Nuri Erginer

8

Promote and discuss your product / Re: Mach3 as 3d printer software

« on: July 07, 2011, 07:29:35 AM »

If you want I can send you the board without soldering the LCD. A removable socket is also possible.

Regards,
Nuri Erginer
 

9

Promote and discuss your product / Re: Mach3 as 3d printer software

« on: July 01, 2011, 03:37:09 AM »

Hi BTS,

There are some differences between gnexlab extruder controller and the makerbot's. The main issue is gnexlab controller is standalone and do not communicate with pc. The on board lcd and trimpots let you to set the extruder and the heated bed temperatures. If you want to use mach3 as a 3d printing software, communicating via pc while mach3 pulsing the motors become a problem. The message traffic corrupts the pulse sequences. The gnexlab solution lets the mach3 control the motors including the extruder stepper as 4th axis. The gnexlab extruder controller dealing with the temperatures without pc.

Regards,
Nuri Erginer

10

Promote and discuss your product / Re: Mach3 as 3d printer software

« on: June 22, 2011, 02:12:57 PM »

Please take a look at my web store to purchase assembled boards.

http://store.gnexlab.com/

regards,
Nuri Erginer