Hello Guest it is April 11, 2021, 03:59:01 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jlautomatio

Pages: 1 2 3 4 5 »
1
LazyCam (Beta) / lazycam need info on dxf files
« on: November 06, 2007, 09:17:21 PM »
my question is this if i hahe rectange box with corner with arc the problem is when i cut with mach3 it cut the line ccw  and the arc it cut some time ccw or cw and dont follow the line the z go up and down 

2
General Mach Discussion / mach3 repeat info
« on: September 15, 2007, 07:00:08 PM »
i made nc file with meshcam from stl file my question is this could i repeat the same file 2 or 4 or more with x or y offset and then the cnc stop a other way to ask is if my file is 2x2 and the pice of wood is 2.5 x 12 so my file will be repeat 6 time and stop to change the peice of wood thank you jacques

3
LazyCam (Beta) / Re: inf lazycam 2.64 mach3 rc2.0.g
« on: November 18, 2006, 01:51:40 PM »
hi Brian


???????
on ver 2.66 you change------------ layer control---------------- for ------------auto clean setting -------------------?????
how we put all the inf we use to put on layer control it was easy on the first one
thank you jacques

4
LazyCam (Beta) / Re: inf lazycam 2.64 mach3 rc2.0.g
« on: November 18, 2006, 08:53:24 AM »
this is small video  to see the problem

5
LazyCam (Beta) / Re: inf lazycam 2.64 mach3 rc2.0.g
« on: November 15, 2006, 08:01:11 PM »
allo Brian

on lazcam 2.66 still missing  the    \   when we change in gcode file options it lose the   \ 

thank you


6
LazyCam (Beta) / Re: inf lazycam 2.64 mach3 rc2.0.g
« on: October 21, 2006, 06:59:52 PM »
hello
still not find the problem about the  \  missing
thank you
jacques

7
LazyCam (Beta) / Re: inf lazycam 2.64 mach3 rc2.0.g
« on: October 16, 2006, 06:54:54 PM »
sory this is the one after i change dir
thank you
jacques

8
LazyCam (Beta) / Re: inf lazycam 2.64 mach3 rc2.0.g
« on: October 16, 2006, 06:48:01 PM »
this 2 file the original and after

the original it ok save at c:\mach3\gcode\

and after i change dir like C:\mach3\gcode\demo

it mist the \ after demo and save like this c:\mach3\gcode demof34.nc
so the file is demof34.nc it should be in file c:\mach3\gcode\demo\   and name f34.nc

you gone to find in the xml file after  place to save it mist   the  \   after c:\mach3\gcode\demo  <-----------

thank you
Jacques

9
LazyCam (Beta) / Re: inf lazycam 2.64 mach3 rc2.0.g
« on: October 12, 2006, 06:15:02 PM »
allo brian
not fiend the problem on lazycam
thank you
jacques

10
LazyCam (Beta) / Re: inf lazycam 2.64 mach3 rc2.0.g
« on: October 06, 2006, 06:48:35 PM »
hi brian
soon you fix the problem let me know and put on ftp
thank you
jacques

Pages: 1 2 3 4 5 »