1
General Mach Discussion / Re: Second Mill of a rectangle is not accurate
« on: June 28, 2013, 07:00:42 AM »
Hi Rich
I finally found the problem.
As you said first it was a Hardware issue. It was a coincidence that it worked with the other Application.
The problem sesms to be the computer hardware. I've tried another machine and now it works.
TTL Signals were incorrect so the step motor lost steps during movement.
I'm really sorry for the work I've generated.
Best Regards
Chris
I finally found the problem.
As you said first it was a Hardware issue. It was a coincidence that it worked with the other Application.
The problem sesms to be the computer hardware. I've tried another machine and now it works.
TTL Signals were incorrect so the step motor lost steps during movement.
I'm really sorry for the work I've generated.
Best Regards
Chris