5
« on: February 19, 2019, 12:21:31 PM »
hi all, i'm having trouble with the spindle starting and at about 20% it starts making the first XY movement
before spindle fully starts. if i start at Z zero, it scratches the stock. and it has a Z movement BEFORE XY
in the control configuration, spindle, checked = wait on spindle to stabilize to 95 percent. (was 90%)
spindle override delay; 1500ms ... (was 500ms)
THANKS for any help !
Mach4hobby ver. 4.2.0.4082
%
O0100
(PROGRAM NAME - SQUARE.NC)
(DATE - WED. 02/13/2019 ,TIME - 12:18PM)
(POST - Mach3 )
(TOOL LIST)
T1 (1/8 FLAT ENDMILL - STANDARD)
G90 S4200 M03
G00 Z.2
G54 X0.1875 Y-0.1875
M08
Z0.2
Z0.1
G01 Z-0.1 F4.
Y-1.0625
X1.0625
Y-0.1875
X0.1875
G00 Z0.2
Z0.25
M05
M09
G90 Z0.2
G00 X0 Y0
T1
M30
%