1
Post Processors / Re: Featurecam 2012 post for mach3 turn needed
« on: November 10, 2016, 04:58:53 AM »
Hi, thanks for reply! I am using a 3 axis milling machine that I have assembled myself for hobby usage.
I used meshcam in the past and never had any issue. I am now using featurecam 2012
and I am having lots of issue depending on post processor used. Mach3 would not compile
the NC code depending on the post processor I use.
''Cannot use two g codes that both use axis values , Block = N4715 G0 G91 G28 Z0 M09
Line 941 "
or post processor e.g emco, ---Unknown word starting with r , Block = Program #Myfirst part
Line 0 -- When I delete all syntax problem, the result is completely wrong.
I used meshcam in the past and never had any issue. I am now using featurecam 2012
and I am having lots of issue depending on post processor used. Mach3 would not compile
the NC code depending on the post processor I use.
''Cannot use two g codes that both use axis values , Block = N4715 G0 G91 G28 Z0 M09
Line 941 "
or post processor e.g emco, ---Unknown word starting with r , Block = Program #Myfirst part
Line 0 -- When I delete all syntax problem, the result is completely wrong.