Topics

1

Mach4 Toolbox / Lathe Emco PC Turn ATC Macro

« on: September 19, 2023, 03:24:55 PM »

Hi, I converted an Emco PC Turn to Mach 4. Everything works perfect except the tool change. The automatic tool changer is turret style and has six positions. input6 is a counter for each tool position; input7 is triggered for tool one. output6 switches on the turret. Processing: When output6 is activated the turret starts to turn. For each tool position input6 is counted up to tool position 6. When input 7 is triggered the tool position starts with tool position one. The turret turns until the correct tool position is counted. Then output6 is deactivated. The turret turns back for 2.5 seconds.
Is there anyone who can create the macro. Of course I pay for it.
Johannes