Topics

1

General Mach Discussion / How to create 4 Linaer Axis in Mach 3

« on: March 18, 2014, 02:52:33 PM »

Hi

Is it possible to use A axis as a Linaer axis so that you can run with 2 tables with Y & A axis. I have a Alberti Format 90 cnc machine that I rebuild to mach 3, now I use A axis as a slave, but I want to run the two Tables separeat.

2

VB and the development of wizards / button for activate/deactivate output 7

« on: February 24, 2013, 10:53:13 AM »

hi

I'm trying to get a button working in mach3 to activate output 7 when pushed and deactivate when pushed again. output 7 port 10 pin 7 on the pokey.
Pin no 7. is set to output and IO to output7.

The pokeys is a 57E with the new plugin for mach3

hope some can help me with a VB for this.

/Mike

3

General Mach Discussion / homing routine

« on: September 09, 2009, 08:18:21 AM »

Hi

I have 2 problems with the ref allhome function

1. I want that for X and Y after have activated the home switches run to a ref point and reset to zero ?


2. after I've made a ref allhome mach3 locks and must be reset to continue. this is only in program run (ALT-1) if I do it in diagnostics (ALT-7) one at a time I can get move on.

hope any one can help me with my problems.

Thanks

Mike