Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: manmeran on December 19, 2008, 08:48:27 AM

Title: change value STEP PIN#
Post by: manmeran on December 19, 2008, 08:48:27 AM

in "port configuration"   i have changed "STEP PIN" of "X axis" +apply .
but it return to other value.
what problem?

Title: Re: change value STEP PIN#
Post by: Hood on December 19, 2008, 09:51:55 AM

try save settings from Config menu, if you still have probvlems please attach your xml.
Hood