Machsupport Forum
Tangent Corner => Tangent Corner => Topic started by: John Mac on December 10, 2008, 08:10:46 AM
-
Hi All
I stumbled on this site while looking for Cap screw dimensions... It Googled straight up.
http://www.roymech.co.uk/Useful_Tables/Screws/cap_screws.htm
Or Screws in general
http://www.roymech.co.uk/Useful_Tables/Screws/
Or Useful_Tables
http://www.roymech.co.uk/Useful_Tables/
Or The Home page
http://www.roymech.co.uk/
If you stumble on a link it is often rewarding to strip away the levels one at a time....You never know what you may find.
Cheers
Macka
-
Thanks Maca,
Really useful stuff there.
Regards, Tweakie.
-
Hi All
Some usefull calculators.
http://www.handymath.com/calculators.html
Cheers
John Mac
-
This some fantastic information.
Thanks so much for sharing - :)
Dave
-
Hi All
A handy on line conversion tool.
Newtons pounds force ETC
http://www.onlineconversion.com/force.htm
A better explanation
http://www.seattlescience.com/2005/11/07/converting-pounds-to-newtons
Even Biblical measures Here
http://www.convert-me.com/en/
Cheers
John Mac
-
Hi Maca,
Where do you keep finding all this useful stuff from ?.
Regards, Tweakie.
On reflection, I know where what I really mean is how ?.
-
Hi All,
Check out this site. I think every program or calculator even created exist's in there all broken down by subject.
You could spend hours depending on need or interest.
http://www.martindalecenter.com/
RICH
MODIFIED: BTW I don't know why, but if i go to that site at work i get a work related warning me i will be reported to the
boss ! Must be something in their stupid word monitoring.
-
Hi All
Another good site Lots of Beam section properties inc Aluminium shapes
http://www.efunda.com/about/about.cfm
Cheers
John Mac
-
Hi All
I am doing some research on steel band drives.
It is not easy to get information, If anyone has more info please reply.
I found this site:
http://www.belttechnologies.com/index.htm
If you register (There was no hassle) you can get some reasonable design Info....
Cheers
John Mac
-
Hi All
A lot of online engineering calculators.
http://www.engineersedge.com/calculators.htm
There are a lot more than the JPG shows
Cheers
John Mac
-
Hi All
I am trialling this software. Free for thirty days then 14 EUR to register
Easy to use and you can define your own shapes or use the built in library.
http://www.mitcalc.com/
It would be good tompare it with other software products...Any Ideas?
Cheers
John Mac
-
Hi All
Nuts, Bolts and rivets.
http://www.atlanticfasteners.com/brands/manuf-links.html
This is a Very usefull home page with links to dozens of fastening companies
Cheers
John Mac