Machsupport Forum
Mach Discussion => VB and the development of wizards => Topic started by: swets on December 07, 2008, 06:18:18 PM
-
I'm a lot on a Dutch CNC forum, en someone make this:
(http://i12.photobucket.com/albums/a220/ArieKabaalstra/Beagle-1/DSC_0476.jpg)
but the guy is anti Mach3 , it looks like a pinball machine... ;D
is there someone who can write a wizard or something to do this with MACH 3?
i know he do it with a bol/sphere frees and a for next loop... everytime the tool goes deeper in the material... the circle it makes grows bigger....
(sorry for the bad English)
-
Have a look at this thread.
http://www.machsupport.com/forum/index.php/topic,9755.0.html
Brett