Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: arboleda4 on November 30, 2008, 04:48:38 PM

Title: Spindle not turning
Post by: arboleda4 on November 30, 2008, 04:48:38 PM

Hi all
got a problem. My wabeco lathe wont turn the chuck . Works ok in manual and the axis works in cnc but no spindle
although the the spindle led is lit it must think it is on.
Any ideas
Dave

Title: Re: Spindle not turning
Post by: Hood on November 30, 2008, 05:23:41 PM

You will have to give more info how its wired, how its controlled and how you have it set up in Mach.
Hood