Machsupport Forum

Tangent Corner => Tangent Corner => Topic started by: jaja on November 27, 2008, 05:57:04 PM

Title: how to paste a picture (.jpg) on the tangent corner in a new topic?
Post by: jaja on November 27, 2008, 05:57:04 PM

Tryed to paste some pictures in a new topic in this section, the tangent corner.
I think it could not be done, since there is no "attach" possibility under the "additional options" button.
So what is the right way to do this?
I have a few pictures of some strange tools, from which i don't know how they could be used with my new lathe.
Perhaps someone else knows all about it.

greetings jaja

Title: Re: how to paste a picture (.jpg) on the tangent corner in a new topic?
Post by: RICH on November 27, 2008, 11:22:37 PM

jaja,
You can't just paste it. Clip brouse, find / select the file, and you should see it attach.
You can attach up to 4 files per post by clicking the (more attachments) next to Browse.
RICH

Title: Re: how to paste a picture (.jpg) on the tangent corner in a new topic?
Post by: jaja on November 28, 2008, 08:33:45 AM

hello Rich,

thanks for your answer
yesterday there was no "attach" screen and a possibility to browse to a folder, under the additional options in the tangent corner.
i saw it under several other topics, but not under the "tangent corner"
some setting in my computer/ firewall or something like that, i suppose
thanks, now i can post my pictures of strange lathe parts.
jaja