Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: Al on November 10, 2008, 02:24:51 PM
-
I have drawings referencing center lines, so my drawings are both - and + X&Y. When I import the dxf into Lazycam the drawing becomes positive X&Y only. Am I missing something in Lazycam (licensed version) to allow it to use and post - & +
Al
-
Al,
Under "Setup/Loading Options/Autoclean Setings" on the tool bar, try checking this box.
RC
-
RC
thanks so much...I knew it would be something I overlooked
Al
-
No prob Al,
If you do any turning, keep an eye on the LazyTurn board and pinpoint as many issues as possible for ART.
We're going to try to keep him here through the winter....he's doing great work with LT.
RC