Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: olsson on November 08, 2008, 07:42:25 AM
-
Hi ,
Why my LED blink frequency some times change it, in general goes to high.
can someone answer this question.
-
Which leds are you talking about.
-
Hi, Jimpinder
Thanks a lot for your answear , I was talking about "reset led" , just for you get clear the mensage as "ticker0" come to fast also.
-
Hi, Jimpinder
Thanks a lot for your answear , I was talking about "reset led" , just for you get clear the mensage as "ticker0" come to fast also.
-
Olsson
Not really sure what you are meaning but if it is that sometimes you get a reset then it could be noise getting to your limit switches, if thats what you are meaning then try increasing the debounce a bit.
Hood