Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Roy on November 05, 2008, 07:54:37 AM
-
I now have my machine pretty much set up as I want it with Mach 3.
However whilst testing out various things last night I find there is a delay of approx 1.5 - 2 seconds from pressing the feed hold button until the machine actually stops feed.
Is there a setting for this somewhere that I have missed?
Thanks, Roy
-
ROy the feedhold delay is MACH emptying out the buffer so it can stop at a known point. You can reduce the time by adjusting the look ahead setting BUT it may effect other things
(;-) TP