Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: antony_vm on June 18, 2006, 05:20:02 AM

Title: ac servo motors
Post by: antony_vm on June 18, 2006, 05:20:02 AM

Hai All,

Could any one help me with the description about the AC Servo motors.

I think it has 3 in no of coils and so can I use a 3 phase AC induction motors with it.

With  the fanuc motors I have seen that they metion the frequency of the motors something like 400 hz.

Could any one help with this I am planning to use the AC servo drives from rutex so could anyone help me how to choose a suitable motor.

Regards,

Antony.

Title: Re: ac servo motors
Post by: Brian Barker on June 18, 2006, 07:04:41 AM

I spec the motors and drive at the same time from the same company :( I do it like that because I know they will work! just what I do...